Lloyd Mats, the leader in custom-fit automotive floor mats, has announced the availability of three new Shelby GT350 logos, including the new Red GT350 Sidemarker, on its line of Mustang and Shelby products. These officially licensed Shelby logos can be applied to Lloyd Mats plush carpet floor mat for the 1965-1970, 2013-2014 and 2015-present Shelby Mustangs. When Carroll Shelby was approached by Ford to modify the 1965 Mustang for improved looks and performance, the Shelby GT350 was born. Designed to be a high-performance version of the popular new pony car, Shelby upgraded the engine, suspension, interior and

Vintage Air Introduces New Features for its Gen IV SureFit A/C System for 1957 Chevy

Vintage Air, the leading manufacturer of complete performance air conditioning systems for classics, hot rods and street rods, has announced the release of its updated Gen IV SureFit air conditioning system for the 1957 Chevy. This new system is available as both a Complete Kit and Evaporator Kit and features several new upgrades including a redesigned evaporator mounting bracket kit for easier installation. As part of Vintage Air’s continuous improvement with engineering goals, the new 1957 Chevy SureFit kit now incorporates several features in response to customer feedback. Upgrades include a new condenser bracket and lines, a

GM LS Engine Twin and Single Supercharger Kits from TorqStorm

TorqStorm is introducing two new centrifugal supercharger kits for GM LS transplant engines that have become popular fitments in a wide range of older cars and trucks. The twin kit supports 1,000-plus horsepower while the single sustains 700 plus. Both can be adapted for use with electronic fuel injection or carburetion. But this is only the start. Though the new designs are aimed at LS-powered hot rods, the game-changer for TorqStorm has been an increased attention to greater completeness. Whether supplied as twin or single, the kits include a Sanden air conditioning compressor, Turn One power steering

MSD Solid State Relay Block

Are you embarrassed to open your hood because of the comments you might get on that unsightly wiring mess? Clean up your firewall and tidy your engine bay with MSD’s Solid State Relay Block. This compact module takes the place of four standard relays, eliminating excessive and redundant wiring and simplifying your next wiring project. MSD’s Solid State Relay Block incorporates four independent channels that can be activated and deactivated using either 12-volt power or a ground trigger. Each of the four channels is capable of handling up to 20 amps of continuous current draw, providing up

Vortech V-30 Supercharger

Vortech Superchargers, the company synonymous with efficient boost across the performance industry, is proud to announce the next evolution in race supercharger technology – the Vortech V-30. Utilizing notable advancements in all facets of design and execution, the V-30 is the culmination of years of research & development into new centrifugal compressor technology. Nano-Tolerance Technology, Diverging Diffusion Technology, Superior Bearing Components, and multiple advancements in Enhanced Air Inlet Design come together to produce the most technologically advanced superchargers to date. What this means to you is less heat, lower IATs, and even more power at your disposal.

Camaro ZL1 and CTS-V Supercharger Inlet Upgrade From Superchargers Online

Superchargers Online’s new LSA Performance Inlet lets Chevrolet Camaro ZL-1 and Cadillac CTS-V owners get more boost out of their superchargers with minimal effort. Superchargers Online, a leading distributor of superchargers and superchargers parts, is excited to announce its new LSA Performance Inlet. Built using brand new EATON factory parts, this performance inlet is a direct bolt-on upgrade for the Chevrolet Camaro ZL-1 and Cadillac CTS-V, and is available with two different size ZPE/SCOL GripTec® performance pulleys. The LSA engine was one of General Motors’ first factory supercharged V8 engines, and when it hit the streets in

Expanded Selection of Metric Bolts from ARP

Industry leading high performance fastener manufacturer ARP has expanded its selection of “bulk” metric bolts to cover sizes from tiny M6 with a 12mm underhead length to a big M12 x 100mmn UHL offering. The M6 bolts are made with a 1.00 pitch count, the M8 fasteners have a 1.25 count, M10s come in both 1.25 and 1.50 pitch and M12 bolts are available with 1.50 and 1.75 pitch counts. All are available in polished stainless steel or black oxide finished 8740 chrome moly and both are rated at 170,000 psi tensile strength—substantially higher than ISO 8.8

Forgeline ML3 Heritage Series Wheels

Forgeline Motorsports is expanding its Heritage Series Wheel line with the new three piece ML3 wheel. With styling references borrowed from the Minilite Trans Am wheels of the late 1960’s and early 1970’s, the forged ML3 features ten semi-rounded soft-sided spokes for a retro look that is combined with Forgeline’s modern lightweight engineering and manufacturing techniques. It is available in both deep and shallow concave profiles in a wide range of sizes, including 18, 19, and 20-inch. “At Forgeline, we work very hard to create new wheel designs that meet the styles and applications that our customers