QA1 Introduces High Horsepower REV Series Carbon Fiber Driveshafts

QA1 is proud to introduce high horsepower designs with its REV Series Performance Carbon Fiber Driveshafts. Available for vehicles with up to 2000 horsepower with a max torque of 1500 lb*ft, these driveshafts are now offered in a 3.7” diameter with 1350 U-joints and slip yoke options to fit a variety of popular applications. QA1 launched the REV Series earlier this year with lightweight street performance driveshafts offered in a 3.2” diameter with 1310 U-joints and designed for vehicles with up to 750 horsepower with a max torque of 500 lb*ft. With the addition of these higher

MagnaFlow Cat-Back Exhaust for 2016 Ford Shelby GT350

Ford’s 2016 Shelby Mustang GT350 is one of the most unique modern muscle cars on the road thanks to its flat-plane crank design that sits inside of a very special 5.2 liter V8. The factory exhaust is plenty aggressive, but there is always a way to free up more power and now MagnaFlow has figured out the recipe to do so with its latest valved, competition cat-back system. MagnaFlow’s exhaust systems add a smooth, deep tone while increasing exhaust flow and power. This stainless steel bolt-on kit (PN#19283) has been engineered for maximum performance with dyno proven

New ProCharger F-3X-143 Supports Up To 3300 Horsepower

With ProCharger racers pushing the limits of the F-3R-136 they knew it was only a matter of time before guys would be chomping on the bit for more power. With cylinder head technology at an all time high, and billet engines upping the power numbers daily, it’s an amazing time to be in heads up racingl. The new ProCharger F-3X-143 is the perfect supercharger to maximize these platforms for the ultimate power from a single power adder. Taking key notes from the record smashing F-1X, combined countless hours in the Aerodynamic testing cells, mated to the bulletproof

Dodge Hellcat PCM Tuning from DiabloSport

Even the meanest beast on the street can use more power! DiabloSport tunes for the 2015 SRT Hellcat Chargers and Challengers take what’s great and make it even better. Running one of their performance tuners and a Diablo Modified PCM in your Hellcat will create an instant boost in horsepower and torque. The whole setup takes less to an hour to install, and supports custom tuning for additional mods. The new Charger and Challenger SRT Hellcat models are undoubtedly powerful driving machines. Stock Hellcat dyno pulls (on a Superflow, load-bearing dyno) showed them making around 660 to

MSD Introduces the Atomic AirForce Intake Manifold for LT1 Platforms

If you’re looking for bolt-on power and torque for your new LT1, the new Atomic AirForce intake manifold from MSD is the answer! This all-new polymer intake will increase the performance of stock and modified versions of the Direct-Injected LT1 engine. MSD initiated the clean-sheet AirForce design by addressing the performance shortcomings of the OEM manifold. Through the use of Computational Fluid Dynamic modeling, MSD was able to optimize the plenum volume and improve runner layout. Unique bell-mouthed runner openings, optimum runner length, and minimal shrouding ensure maximum airflow and cylinder-to-cylinder balance. The LT1 intake is a

STRUT Tesla Model S Carbon Fiber Grill Collection

STRUT, globally known for its trendsetting and distinctive collections of grilles, wheels, and accessories for high-end automobiles and SUVs, has announced a stunning new collection for the Tesla Model S, the ultimate in luxury, performance and technology in an electric car. One option of STRUT’s Tesla Model S Collection features a custom-made carbon fiber grille with the distinctive STRUT shield, side-trim moldings and a rear spoiler. After purchase, owners can further personalize any of the collections components with color accents through a local custom shop. “Carbon fiber is a great option for the Tesla S Collection,” said

Painless Performance Direct Fit 1968-1969 Chevelle and Malibu Harness

Painless Performance now has your most complete 1968-69 Chevelle & Malibu Harness! This harness provides everything you need for connecting standard factory components as well as aftermarket components. Including options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. This harness follows all of the same routing found on the factory harness which allows you to utilize the factory harness attachment points. Extra length has even been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. Also included is a 120+ page

Smittybilt 2007-2015 Jeep XRC Bumpers

With an updated look that is sure to be a hit with Jeep owners, the next generation XRC bumpers were designed to meet the needs of off road enthusiasts. The new bumpers for 2007-2015 JKs feature raised corners that allow greater approach and departure angles, perfect for vehicles running oversized tires. The new front bumper now allows the use of the OE fog lights. The redesigned solid D-ring mounts feature an integrated recovery point. The winch plate has been placed lower for greater airflow to the radiator. The new over-rider is 1.75″ diameter and has integrated mounts